This is an old revision of the document!
| S40PX0MHGAM-375 | A 7X 1M100300 | |
|---|---|---|
 |  | |
| 10 (-.005/-.014) mm Dia, 375mm Long, 416 ST. Steel Shaft | 10 (-.005/-.014) mm Dia, 300mm Long, 303 ST. Steel Shaft | |
| S40PX0MHGAM-280 | A 7X 1M060400 | |
 |  | |
| 10 (-.005/-.014) mm Dia, 280mm Long, 303 ST. Steel Shaft | 6 (-.004/-.012) Dia, 400mm Long, 303 ST. Steel Shaft | |
| A 7Z41MPSB10M | A 7Z41MPSB06M | |
 |  | |
| Self Lubricating Bronze Bearing 10.02mm Bore 15.9mm Panel Hole diameter | Self Lubricating Bronze Bearing 6.02mm Bore 14.5mm Panel Hole diameter | |
| A6A51M018DF0606 | A6A51M015DF0604 | |
 |  | |
| GT (2mm) pitch, 18 Teeth, Aluminum alloy Timing Pulley | GT (2mm) pitch, 15 Teeth, Aluminum alloy Timing Pulley, 6mm length (6mm length로 대체) | |
| A6A51M015DF0904 | A 7Y 5MF0804G | |
 |  | |
| GT (2mm) Pitch, 15 Teeth, Aluminum alloy Timing Pulley, 9mm length | Flanged- ni sheild ball bearing. 4mm Bore Dia. 8mm Outer Diameter, Stainless/ISO 6 | |
| A 5X 9M0406 | A 7X 1M100300 | |
 |  | |
| Rigid Coupling with bores of 4 / 6MM on Opposite Sides | 4 (-.004/-.012) Dia, 25mm Long, 303 ST. steel shaft | |
| A 7C 2M108040 | A 6R51MC060 | |
 |  | |
| 4MM Bore, 8MM O.D, 5MM WIDE, STEEL/Zinc. PLATE, COLLAR STYLE | 3mm GT2 pitch, 6mm Wide, Open ended Neoprene Belt | |
| 92095A194 | 94180A351 | |
 |  | |
| Metric 18-8 SS Button Head Socket Cap Screw M4 Size, 16 mm Length, .7 mm Pitch | Metric Brass Threaded Insert for Thermoplastc Tapered, M4x.7 Internal Thread, 4.7mm Length | |
| 91290A106 | 94180A321 | |
 |  | |
| Metric Class 12.9 Socket Head Cap Screw Alloy Stl, M2.5 Thread, 16mm Length, 0.45mm pitch | Metric Brass Threaded Insert for Thermoplastc Tapered, M2.5-.45 Internal Thread, 3.4mm Length | |
| 93365A130 | 93365A160 | |
 |  | |
| Brass Threaded Insert for Thermoplastics Tapered, 6-32 Internal Thread, .150“ Length | 1/4-20 brass threaded inserts; 0.3inch length | |
| 9377K53 | 90945A715 | |
 |  | |
| Rubber Foot; 1/4-20 X1/2inch thread; 1inchdiameter 25lb rated | Stainless Steel washers .016” thick .15“ID .27”OD | |
| 91882A227 | 92949A148 | |
 |  | |
| #6-32 thumb screw 1/2“ length | #6-32 Button head hex socket, 1/2” long 18-8 stainless steel | |
| 94855A115 | SM062 | |
 |  | |
| #6-32 Flat Square Nut; Steel; 5/16inch OD; 7/64inch thick | SM062 motor | |
| SM062 | SM062 | |
 |  | |
| SM062 motor | SM062 motor | |
| SM-HUB6 | SM-HUB6 | |
 |  | |
| snap hub (SM-HUB6) | snap hub (SM-HUB6) | |
| 98861A040 | 90368A150 | |
 |  | |
| Metric Class 4.6 Plain Steel Threaded Rod, M3 size, 1 meter length, .5 mm Pitch, 140mm req'd | Metric 18-8 SS Round Knurled Thumb Nut, M3 screw, 12mm Head Dia, .5mm Pitch | |
| A 1P 2MYD08035D | A 1P 2MYD08035B | |
 |  | |
| 6mm bore, 28mm pitch dia. 16mm hub dia. | 4mm bore, 28mm pitch dia. 16mm hub dia. | |
| A 7Y 5MFSS0603G | ||
 | ||
| mm Bore, 6mm Outside Dia., 440C Stainless / ISO 6 Ball bearing, lube with Grease (Beacon 325) | ||
